The Sure Power Battery Separator is designed for use in multi-battery applications as a excessive loading while allowing auxiliary batteries to be charged. The Sure Power Battery Separator has two basic operational characteristics.
Unidirectional : This means that the charge current only goes in a single (Uni) direction; from the "Main Battery" to the "Auxilary Battery". Or more simply, the first battery to be charged, to the second battery.
Voltage : 12 Volts Amperage : 200 Amps Approx. Item Weight : 1 Pound
DOCUMENTS / MANUALS
Clicking upon a link in the "Documents" section, will cause a .PDF to open in a new browser window/tab.
ENGINE START ASSIST :
When the starter is activated the Battery Separator compares the voltage of both battery banks. If the chassis' battery is lower the the auxiliary battery bank, the Battery Separator will engage, allowing the auxiliary battery bank to aid in vehicle starting. The start signal must be at least three volts for this operation to occur.
PROTECTS CHARGING SYSTEM :
Once the engine has started, the Battery Separator monitors the chassis battery and charging system. When the charging system reaches 13.2 Volts, indicating a charged main battery and functioning charging system, the Battery Separator will engage, connecting the auxiliary battery bank to the vehicle charging system. If the drain on the charging system by the auxiliary battery bank reduces the system voltage below 12.8 volts, the Battery Separator will disconnect the auxiliary battery bank, thus protecting the chassis charging system. The process is repeated until the charging system is turned off.
WHY BUY A SURE POWER BATTERY SEPARATOR?
Connects to primary battery, auxiliary battery and ground. Absolutely no system modifications are necessary.
PRIORITIZED BATTERY CHARGING
The Battery Separator waits until the battery connected to the active charging source reaches approximately 13.2 Volts before paralleling and charging the remaining batteries. The system disconnects at approximately 12.8 Volts.
MULTIPLE BATTERY CHARGING
The battery separator allows multiple batteries to be charged from one charging source (usually, but not necessarily, an alternator). When the batteries are not being charged, the Battery Separator separates or isolates the batteries.
START ASSIST FEATURE
An optional input from the key switch or a manual switch will program the Battery Separator to parallel the batteries during starting. This feature will only engage if the auxiliary battery has sufficient power available to assist in starting.
PREVENTS CHARGE SYSTEM OVERLOAD
If the current requirements are greater then the charging source can produce, the Battery Separator will automatically separate the batteries, thus directing all available charge current to the battery directly connected to the charging source. The system will then reset and re-attempt charging the auxiliary battery. A time delay prevents false switching.
Manufacturer Profile :
Sure Power Industries (now part of Eaton Corporation) provides a wide variety of quality products and engineering services designed to aid in the management of DC electrical systems. Since inventing the Battery Isolator in 1959, Sure Power has been designing and manufacturing innovative, reliable and cost competitive products and services for a wide variety of markets including off-highway, bus, and truck, marine and automotive.
|Brand||SURE POWER INC.|