Sure Power Battery Converter
Part#: 12010C00

12 volt to 24 volt ∼ 10 Amp w/ Switched Output

This Sure Power Converter is designed to provide 12V to 24V power conversion for heavy-duty applications. This converter provides a fixed output to power 24V loads directly from a 12V source.

The converter can withstand load dump, reverse battery, short circuit, and over-temperature without damage to the unit. The switched output is implemented using a MOSFET transistor. Due to the MOSFET body diode the switched output should never be connected to a battery or voltage source.

Protection circuits include an over voltage monitor for input voltage and over temperature monitor attached to the PCB near the internal FET's. Both monitors can shut the converter off until the corresponding out of range condition is corrected.

Specification Outline & Instruction for the 12010C00 Converter

Sure Power : Intro to batteries and charging

Over Voltage Shutdown: 16 Volts to 17 volts

Output Voltage: (Average) 24 Volts
23.5 volts to 24.5 volts for input voltage above 22 volts.

Output Continuous Load: 10 Amps

Operational Temperature: -40° to +185° F (+85° C)

Approx. Item Weight: 4 Pounds

Under and Over Voltage Protection

Reverse Voltage Protection

Voltage Transient Protection

Over load and Short Circuit Protection

Thermal Overload Shutdown

Equalization Status Indicator

Sealed from the Elements

Ignition Turn On