This Sure Power Converter is designed to provide 12V to 24V power conversion for heavy-duty applications. This converter provides a fixed output to power 24V loads directly from a 12V source.
The converter can withstand load dump, reverse battery, short circuit, and over-temperature without damage to the unit. The switched output is implemented using a MOSFET transistor. Due to the MOSFET body diode, the switched output should never be connected to a battery or voltage source.
Protection circuits include an over voltage monitor for input voltage and over temperature monitor attached to the PCB near the internal FET's. Both monitors can shut the converter off until the corresponding out of range condition is corrected.
DOCUMENTS / MANUALS
Clicking upon a link in the "Documents" section, will cause a .PDF to open in a new browser window/tab.
The unit utilizes three channel shaped bus bars for making power connections. Each bus bar is equipped with an M8 hex head bolt. The bolt head is captured within the channel and the channel prevents rotation of the head, when tightening the nut. The control connections are made via 1/4" male tabs.DESCRIPTION OF FEATURES
Under and Over Voltage Protection Reverse Voltage Protection Voltage Transient Protection Over load and Short Circuit Protection Thermal Overload Shutdown Equalization Status Indicator Sealed from the Elements Ignition Turn On
Short circuit and current limiting protection is supplied by monitoring the output current. Detection of a short circuit or overload turns the output off. The unit then cycles the output on every 1.5 seconds to determine if the short circuit has been removed. Upon removal of this condition the output voltage will return to its normal state.
Thermal protection is provided by monitoring the heatsink temperature. Detection of extreme temperature shuts the unit off. When the heatsink cools approximately 15C the unit will automatically turn back on.
Loss of ground Protected : Ensures no damage to the unit.
Unit is protected against all mis-wiring conditions with the exception of the condition where: Unit GND is connected to system +12V, Unit +12V is connected to system +24V, Unit +24V is connected to GND, and Unit IGN is connected to system +24V.
STATUS INDICATOR : An LED status indicator is provided to denote when the unit is producing current. As the batteries become equalized the equalizer current will approach 0 amps, and the LED indicator will diminish in intensity and eventually go dark. In converters, as the output current approaches zero the LED will go dark.
Manufacturer Profile :
Sure Power Industries (now part of Eaton Corporation) provides a wide variety of quality products and engineering services designed to aid in the management of DC electrical systems. Since inventing the Battery Isolator in 1959, Sure Power has been designing and manufacturing innovative, reliable and cost competitive products and services for a wide variety of markets including off-highway, bus, and truck, marine and automotive.
|Brand||SURE POWER INC.|