Heavy Wall Heat Shrink | Adhesive Lined | Black | 6 Inch | 14-16 Gauge

In stock

Adhesive Lined Heavy Wall Heatshrink | 16-14 Gauge

This item is a 6 inch long, adhesive lined heavy wall heat shrink tube for 14 to 16 gauge wire.

The Heavy Wall Heat-shrink is for direct burial of heavy duty electrical cable, where environmental protection is necessary. Our Heavy Wall Heatshirnk tubing is supplied with an adhesive layer, adding a water tight seal to the strain relief the tubing provides. When exposed to heat a tad lower then the activation temperature of the Heavy Wall Heatshrink, the inner layer (adhesive) begins to melt and flow as a standard "glue-stick". When the heatshrink tubing shrinks and cools down, the inner layer forms an adhesion layer between the tubing and the connector or wire. This provides the watertight seal and protects the connector/wire in direct burial and submersed applications. Useful for marine grade applications as well as Heavy Duty.


  • Tube Diameter ( Not Cured ) : 0.3 Inches
  • Tube Diameter ( Cured ) : 0.1 Inches
  • Shrink Ratio : 3:1
  • Color : Black
  • Wire Sizes covered : 14 to 18 Gauge
  • Cured Wall Thickness : 0.08 Inches
  • Tube Length : 6 Inches

More Information
Product NameHeavy Wall Heat Shrink | Adhesive Lined | Black | 6 Inch | 14-16 Gauge


This product may expose you to chemicals

known to the state of California to cause cancer and reproductive harm.

For more information go to www.p65warnings.ca.gov