Heavy Wall Heat Shrink Adhesive Lined - 6" Red (4/0 - 2 Ga.)

SKU
21506
In stock
$2.67
  • Buy 3 for $2.20 each and save 18%
  • Buy 5 for $1.95 each and save 27%
  • Buy 10 for $1.70 each and save 36%

Adhesive Lined Heavy Wall Heatshrink (4/0-2ga.)

This item is a 6 inch long, adhesive lined heavy wall heat shrink tube for 4/0 to 1 gauge wire.

The Heavy Wall Heat-shrink is for direct burial of heavy duty electrical cable, where environmental protection is necessary. Our Heavy Wall Heatshirnk tubing is supplied with an adhesive layer, adding a water tight seal to the strain relief the tubing provides. When exposed to heat a tad lower then the activation temperature of the Heavy Wall Heatshrink, the inner layer (adhesive) begins to melt and flow as a standard "glue-stick". When the heatshrink tubing shrinks and cools down, the inner layer forms an adhesion layer between the tubing and the connector or wire. This provides the watertight seal and protects the connector/wire in direct burial and submersed applications. Useful for marine grade applications as well as Heavy Duty.


SPECIFICATIONS :
  • Tube Diameter ( Not Cured ) : 1.10 Inches
  • Tube Diameter ( Cured ) : 0.370 Inches
  • Shrink Ratio : 3:1

  • Color : Red

  • Wire Sizes covered : 4/0 to 1 Gauge
  • Cured Wall Thickness : 0.12 Inches
  • Tube Length : 6 Inches

  • More Information
    Product Name Heavy Wall Heat Shrink Adhesive Lined - 6" Red (4/0 - 2 Ga.)
    SKU 21506
    Price 2.67
    Brand NATIONAL STANDARD PARTS
    Description

    Adhesive Lined Heavy Wall Heatshrink (4/0-2ga.)

    This item is a 6 inch long, adhesive lined heavy wall heat shrink tube for 4/0 to 1 gauge wire.

    The Heavy Wall Heat-shrink is for direct burial of heavy duty electrical cable, where environmental protection is necessary. Our Heavy Wall Heatshirnk tubing is supplied with an adhesive layer, adding a water tight seal to the strain relief the tubing provides. When exposed to heat a tad lower then the activation temperature of the Heavy Wall Heatshrink, the inner layer (adhesive) begins to melt and flow as a standard "glue-stick". When the heatshrink tubing shrinks and cools down, the inner layer forms an adhesion layer between the tubing and the connector or wire. This provides the watertight seal and protects the connector/wire in direct burial and submersed applications. Useful for marine grade applications as well as Heavy Duty.


    SPECIFICATIONS :
  • Tube Diameter ( Not Cured ) : 1.10 Inches
  • Tube Diameter ( Cured ) : 0.370 Inches
  • Shrink Ratio : 3:1

  • Color : Red

  • Wire Sizes covered : 4/0 to 1 Gauge
  • Cured Wall Thickness : 0.12 Inches
  • Tube Length : 6 Inches

  • Short Description No
    Meta Keywords No
    Meta Description The NSPA Heavy duty red heat shrink (part#: 21506) is a heavy walled version of heat shrink for wires in diameter of 2 gauge to 4/0 awg.
    Free Shipping N/A
    Write Your Own Review

     Warning:

    This product may expose you to chemicals

    known to the state of California to cause cancer and reproductive harm.

    For more information go to www.p65warnings.ca.gov